seaming carpet::There are basically two methods of installing carpet on stairs seaming carpet

seaming carpet::There are basically two methods of installing carpet on stairs.
One is the waterfall method where one piece of carpet covers each riser and tread.
The other is the cap and band installation.
Carpet burns usually are the result of a careless drop of a cigarette or a spark flying out of the fireplace.
You can repair a burn in carpet using the following techniques.
The melted fibers from the burned area in the carpet need to be removed.
You can use a piece of sandpaper or a steel scrubbing pad.
A carpet power stretcher is not to be confused with a knee kicker.
It is used to grab a hold of the carpet and stretch it, leaving a flat smooth surface.
One end is braced against the wall.
A knee kicker is primarily used to pull the edges of the carpet and attach it to the tack strip.
For the actual stretching of the carpet a carpet power stretcher is required.
A knee kicker consists of a piece of metal tubing with a cushion on one end and a pin plate on the other.
Before you install carpet on your stairs, the stairs need to be measured.
Add 2 inches to accommodate for the padding that will be installed underneath and for step curvature.
Making a seam in carpet can be tricky.
Below are some do it yourself instructions.
If you are going to bond two pieces of carpet at the seam you will need a seaming iron.
It is used specifically for seaming carpet.
Your local rental store should have one.
Sometimes where carpet is joined it will eventually wear down causing the seam to split.
Moving heavy furniture across carpet can cause it to rip.
Once you discover you have a seam that is coming apart it needs to be fixed before the carpet fibers begin to fray.
seaming carpet::Making a seam in carpet can be tricky seaming carpet